Administrator Guide

MIBs are hierarchically structured and use object identiers to address managed objects, but managed objects also have a textual name
called an object descriptor.
Implementation Information
The following describes SNMP implementation information.
The Dell Networking OS supports SNMP version 1 as dened by RFC 1155, 1157, and 1212, SNMP version 2c as dened by RFC 1901,
and SNMP version 3 as dened by RFC 2571.
The system supports up to 16 trap receivers.
The Dell Networking OS implementation of the sFlow MIB supports sFlow conguration via SNMP sets.
SNMP traps for the spanning tree protocol (STP) and multiple spanning tree protocol (MSTP) state changes are based on BRIDGE
MIB (RFC 1483) for STP and IEEE 802.1 draft ruzin-mstp-mib-02 for MSTP.
Conguration Task List for SNMP
Conguring SNMP version 1 or version 2 requires a single step.
NOTE: The congurations in this chapter use a UNIX environment with net-snmp version 5.4. This environment is only one of
many RFC-compliant SNMP utilities you can use to manage your Dell Networking system using SNMP. Also, these congurations
use SNMP version 2c.
Creating a Community
Conguring SNMP version 3 requires conguring SNMP users in one of three methods. Refer to Setting Up User-Based Security
(SNMPv3).
Related Conguration Tasks
Managing Overload on Startup
Reading Managed Object Values
Writing Managed Object Values
Subscribing to Managed Object Value Updates using SNMP
Copying Conguration Files via SNMP
Manage VLANs Using SNMP
Enabling and Disabling a Port using SNMP
Fetch Dynamic MAC Entries using SNMP
Deriving Interface Indices
Monitor Port-channels
Important Points to Remember
Typically, 5-second timeout and 3-second retry values on an SNMP server are sucient for both LAN and WAN applications. If you
experience a timeout with these values, increase the timeout value to greater than 3 seconds, and increase the retry value to greater
than 2 seconds on your SNMP server.
User ACLs override group ACLs.
Set up SNMP
The Dell Networking OS supports SNMP version 1 and version 2 that are community-based security models.
The primary dierence between the two versions is that version 2 supports two additional protocol operations (informs operation and
snmpgetbulk query) and one additional object (counter64 object).
936
Simple Network Management Protocol (SNMP)