Administrator Guide
MIB Object OID Object Values Description
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = ash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Species the location of
destination le.
• If copyDestFileLocation is
FTP or SCP, you must
specify copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the le is not in the
default directory) and lename.
Species the name of
destination le.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
• If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP, or
SCP server.
• If you specify
copyUserName, you must
also specify
copyUserPassword.
copyUserPassword .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Password for the server. Password for the FTP, TFTP, or
SCP server.
Copying a Conguration File
To copy a conguration le, use the following commands.
NOTE
: In UNIX, enter the snmpset command for help using the following commands. Place the
f10-copy-cong.mib
le in the
directory from which you are executing the snmpset command or in the snmpset tool path.
1 Create an SNMP community string with read/write privileges.
CONFIGURATION mode
snmp-server community community-name rw
2 Copy the f10-copy-cong.mib MIB from the Dell iSupport web page to the server to which you are copying the conguration le.
3 On the server, use the snmpset command as shown in the following example.
snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-
address mib-object.index {i | a | s} object-value...
• Every specied object must have an object value and must precede with the keyword i. Refer to the previous table.
• index must be unique to all previously executed snmpset commands. If an index value has been used previously, a message like
the following appears. In this case, increment the index value and enter the command again.
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101
948
Simple Network Management Protocol (SNMP)