Administrator Guide

Figure 62. iSCSI Optimization Example
Default iSCSI Optimization Values
The following table lists the default values for the iSCSI optimization feature.
Table 46. iSCSI Optimization Defaults
Parameter Default Value
iSCSI Optimization global setting Disabled.
iSCSI CoS mode (802.1p priority queue mapping) dot1p priority 4 without the remark setting when you enable
iSCSI. If you do not enable iSCSI, this feature is disabled.
iSCSI CoS Packet classication When you enable iSCSI, iSCSI packets are queued based on dot1p,
instead of DSCP values.
VLAN priority tag iSCSI ows are assigned by default to dot1p priority 4 without the
remark setting.
DSCP None: user-congurable.
546 iSCSI Optimization