Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
81828384858687888990
• hash-value: (Optional). Specify the relevant hash published on i-Support.
• img-le: Enter the name of the Dell Networking software image le to validate
Examples: Without Entering the Hash Value for Verication
MD5
Dell# verify md5 flash://FTOS-SE-9.5.0.0.bin
MD5 hash for FTOS-SE-9.5.0.0.bin: 275ceb73a4f3118e1d6bcf7d75753459
SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
SHA256 hash for FTOS-SE-9.5.0.0.bin:
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e933
Examples: Entering the Hash Value for Verication
MD5
Dell# verify md5 flash://FTOS-SE-9.5.0.0.bin 275ceb73a4f3118e1d6bcf7d75753459
MD5 hash VERIFIED for FTOS-SE-9.5.0.0.bin
SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e933
SHA256 hash VERIFIED for FTOS-SE-9.5.0.0.bin
Verifying System Images on C9010 Components
Each C9010 RPM contains three components: Control Processor (CP), Route Processor (RP), and line-card processor (LP). Each RPM
component has a separate system image stored in the A: and B: ash partitions. In addition, each installed C9010 line card has a separate
image stored in partitions A: and B:.
To display the system images currently stored for all C9010 components, enter the show boot system all command. In the
command output:
• Column A: lists the system images stored in ash partition A: for each RPM component. Column B: lists the system images stored in
partition B:.
• The components of RPM0 installed in chassis slot 10 are:
– RPM0 control processor: rmp 0 (CP)
– RPM0 route processor: rmp 0 (RP)
– RPM0 line-card processor: linecard 10
• The components of RPM1 installed in chassis slot 11 are:
– RPM1 control processor: rmp 1 (CP)
– RPM1 route processor: rmp 1 (RP)
– RPM1 line-card processor: linecard 11
• The rows linecard 0 through linecard 9 list the system images for each line card installed in chassis slots 0 to 9.
Dell#show boot system all
Current system image information in the system:
===============================================
Type Boot Type A: B:
----------------------------------------------------------------
rpm 0 (CP) FLASH BOOT 1-0(0-4243)[boot] 1-0(0-4226)
rpm 1 (CP) FLASH BOOT 1-0(0-4243)[boot] 1-0(0-4226)
rpm 0 (RP) FLASH BOOT 1-0(0-4243)[boot] 1-0(0-4226)
rpm 1 (RP) FLASH BOOT 1-0(0-4243)[boot] 1-0(0-4226)
linecard 0 FLASH BOOT 1-0(0-4243)[boot] 1-0(0-4226)
Switch Management
85