Administrator Guide

5 Use an equipment lift or two people to lift the empty chassis without blanks (item 1 in Figure 4) and align the rack-mount screw holes
on each ange of the chassis with the holes in the equipment rack. Rest the chassis on top of the rack bar (or rack tray, if installed).
Slide the chassis so that the holes in the side anges align with the holes in the rack posts. Tighten four rack screws (item 2 in Figure
4) on each chassis ange to attach the chassis to the rack posts. Tighten each group of rack screws by starting with the bottom
screw and working up.
Figure 4. Mounting the Chassis into a 2-Post Rack
Installing the Hardware
11