Administrator Guide

To install a rack mount tray in a rack, follow the instructions provided with the tray kit. Decide where you want to mount the switch in the

rack. Position the tray at that height and tighten it to the rack posts using the screws shipped with the tray (items 1 to 4 in Figure 17).

Figure 17. Example of a Mount Rack Tray in a 4-Post Rack

Attaching the Chassis Ground

After you mount the chassis in a rack, ground the device by attaching a chassis ground as follows:

NOTE

: The grounding cable is not shipped with the C9010 base conguration. You must order it

separately.

1 Locate the chassis ground lug nut and holes on the bottom left side (facing you) of the chassis.

Installing the Hardware