Administrator Guide

19 -rwx 3160 Apr 24 2015 19:27:06 +00:00 startup-config
20 -rwx 484734 Feb 19 2015 12:10:04 +00:00 RPM_CPLD_V3.5.vme
21 -rwx 569421 Feb 19 2015 12:13:28 +00:00 LM_QSFP+_FPGA_V3.6.dat
22 -rwx 265208 Feb 19 2015 12:16:18 +00:00 LM_QSFP+_CPLD_V3.0.vme
23 -rwx 569421 Feb 19 2015 12:18:24 +00:00 LM_SFP+_FPGA_V3.6.dat
24 -rwx 262890 Feb 19 2015 12:21:42 +00:00 LM_SFP+_CPLD_V3.0.vme
25 -rwx 569677 Feb 19 2015 12:23:14 +00:00 LM_10GBase-T_FPGA_V3.6.dat
26 -rwx 251098 Feb 19 2015 12:24:14 +00:00 LM_10GBase-T_CPLD_V3.0.vme
27 -rwx 11518 Apr 26 2015 22:33:08 +00:00 TestReport-LP-5.txt
28 drwx 4096 Mar 13 2015 02:28:26 +00:00 DEFAULT_DIAG_REPORT_DIR
29 -rwx 52186974 Apr 24 2015 19:28:16 +00:00 netbsd
30 -rwx 10918 Apr 26 2015 22:33:08 +00:00 TestReport-LP-4.txt
31 -rwx 17134 Apr 26 2015 22:35:56 +00:00 TestReport-CP-unit.txt
flash: 4490649600 bytes total (3903815680 bytes free)
The following example displays results of offline/online diagnostics on a standalone switch for a test log for a Linecard Processor 4.
Dell#show file flash://TestReport-LP-4.txt
Called with cpu = 3 slotID = 4
DELL DIAGNOSTICS-C9000-CP00 [0]
CpuType -- LM
PPID -- CN0CYFF2779314A60021
PPID Rev -- X00
Service Tag -- 15YQG02
Part Number -- 0CYFF2
Part Number Revision -- X00
LM CPLD -- 31
LM extended CPLD -- 30
SW Version -- 1-0(0-4854)
Available free memory: 1,664,086,016 bytes
LEVEL 0 DIAGNOSTIC
Starting test: bcm56854AccessTest ......
+ Access Test for unit 0 : PASSED
bcm56854AccessTest .......................................... PASS
biosVerGetTest .............................................. PASS
boardRevisionTest ........................................... PASS
cpldAccessTest .............................................. PASS
Starting test: CpuGbeLinkStatusTest ......
+ GbE1 Link Status UP
+ GbE2 Link Status DOWN
CpuGbeLinkStatusTest ........................................ FAIL
cpuRevisionTest ............................................. PASS
cpuSdramPresenceTest ........................................ PASS
cpuSdramSizeTest ............................................ PASS
eepromTest .................................................. PASS
extenderCpldAccessTest ...................................... PASS
Starting test: hgLinkStatusTest ......
ERROR: Unit 0 hg port 30 is DOWN
ERROR: Unit 0 hg port 31 is DOWN
ERROR: Unit 0 hg port 32 is DOWN
hgLinkStatusTest ............................................ FAIL
Starting test: i2cTest ......
ERROR: ioctl: "SFP0" op(1)=READ WITH STOP bus=9 address=0x50 offset=0 length=1
ERROR: ioctl: "SFP1" op(1)=READ WITH STOP bus=10 address=0x50 offset=0 length=1
ERROR: ioctl: "SFP2" op(1)=READ WITH STOP bus=11 address=0x50 offset=0 length=1
ERROR: ioctl: "SFP3" op(1)=READ WITH STOP bus=12 address=0x50 offset=0 length=1
ERROR: ioctl: "SFP4" op(1)=READ WITH STOP bus=13 address=0x50 offset=0 length=1
ERROR: ioctl: "SFP5" op(1)=READ WITH STOP bus=14 address=0x50 offset=0 length=1
i2cTest ..................................................... FAIL
Starting test: opticEepromTest ......
ERROR: optic:1 is not present
ERROR: optic:5 is not present
ERROR: optic:9 is not present
ERROR: optic:13 is not present
280
Debugging and Diagnostics