Users Guide

2. Associate above class-maps to Queues Queue assignment to be based on the below table.
Table 18. o Queues Queue Assignment
Internal-
priority
0 1 2 3 4 5 6 7
Queue 1 0 2 3 4 5 6 7
3. Dot1p->Queue Mapping Configuration is retained at the default value.
Default dot1p-queue mapping is,
Dell#show qos dot1p-queue-mapping
Dot1p Priority : 0 1 2 3 4 5 6 7
Queue :2 0 1 3 4 5 6 7
4. Interface Configurations on server connected ports.
a Enable DCB globally.
Dell(conf)#dcb enable
b Apply PFC Priority configuration. Configure priorities on which PFC is enabled.
Data Center Bridging (DCB) 264