Users Guide

Stop reason : after completion
------ Failed tests (level, times) ------
CpuGbeLinkStatusTest (0, 1)
hgLinkStatusTest (0, 1)
i2cTest (0, 1)
opticEepromTest (0, 1)
opticPresenceTest (0, 1)
udfLinkStatus (0, 1)
xeLinkStatusTest (0, 1)
ipcTrafficTest (2, 1)
Example of a Test Log for Control Processor
Dell#show file flash://TestReport-CP-unit.txt
DELL DIAGNOSTICS-C9000-CP00 [0]
CpuType -- RPM-CP
PPID -- CN0CKKCP7793149U0047
PPID Rev -- X00
Service Tag -- 154RG02
Part Number -- 0CKKCP
Part Number Revision -- X00
RPM CPLD -- 33
RPM extended CPLD -- 32
SW Version -- 1-0(0-4854)
Available free memory: 1,357,742,080 bytes
LEVEL 0 DIAGNOSTIC
biosVerGetTest .............................................. PASS
boardRevisionTest ........................................... PASS
Starting test: cpldAccessTest ......CPLD Major Ver 3 Minor Ver 3
cpldAccessTest .............................................. PASS
Starting test: cpuGELinkStatusTest ......
+ GbE1 Link Status UP
+ GbE2 Link Status DOWN
+ GbE3 Link Status UP
cpuGELinkStatusTest ......................................... FAIL
cpuRevisionTest ............................................. PASS
cpuSdramPresenceTest ........................................ PASS
cpuSdramSizeTest ............................................ PASS
eepromTest .................................................. PASS
Starting test: extendedCPLDAccessTest ......extended CPLD Major Ver 2 Minor Ver 3
extendedCPLDAccessTest ...................................... PASS
fanAirFlowDirection ......................................... PASS
fanPresenceTest ............................................. PASS
fpgaAccessTest .............................................. PASS
Starting test: i2cTest ......
ERROR: ioctl: "psu0" op(1)=READ WITH STOP bus=7 address=0x70 offset=0xd7 length=1
ERROR: ioctl: "psu1" op(1)=READ WITH STOP bus=8 address=0x71 offset=0xd7 length=1
ERROR: ioctl: "psu2" op(1)=READ WITH STOP bus=9 address=0x72 offset=0xd7 length=1
ERROR: ioctl: "lm0" op(1)=READ WITH STOP bus=17 address=0x42 offset=0 length=1
ERROR: ioctl: "lm2" op(1)=READ WITH STOP bus=19 address=0x44 offset=0 length=1
ERROR: ioctl: "lm3" op(1)=READ WITH STOP bus=20 address=0x45 offset=0 length=1
ERROR: ioctl: "lm6" op(1)=READ WITH STOP bus=23 address=0x48 offset=0 length=1
ERROR: ioctl: "lm7" op(1)=READ WITH STOP bus=24 address=0x49 offset=0 length=1
ERROR: ioctl: "lm8" op(1)=READ WITH STOP bus=25 address=0x4a offset=0 length=1
ERROR: ioctl: "lm9" op(1)=READ WITH STOP bus=26 address=0x4b offset=0 length=1
i2cTest ..................................................... FAIL
interruptStatusTest ......................................... PASS
Starting test: lmPresenceTest ......LM Slot0 Not Present
LM Slot1 Present
LM Slot2 Not Present
LM Slot3 Not Present
LM Slot4 Present
LM Slot5 Present
Debugging and Diagnostics 298