Users Guide

detection” part of WRED. If the maximum threshold, for example, 2000KB, is reached, all incoming packets are dropped until
the buffer space consumes less than 2000KB of the specified traffic.
Figure 118. Packet Drop Rate for WRED
You can create a custom WRED profile or use one of the five pre-defined profiles.
Table 75. Pre-Defined WRED Profiles
Wred-profile-name min-threshold max-threshold max-drop-rate
wred_drop 0 0 100
wred_teng_y 594 5941 100
wred_teng_g 594 5941 50
wred_fortyg_y 594 5941 50
wred_fortyg_g 594 5941 25
wred_oneg_y_pe 154 1538 100
wred_oneg_g_pe 154 1538 50
wred_teng_y_pe 154 1538 50
wred_teng_g_pe 154 1538 25
Creating WRED Profiles
To create WRED profiles, use the following commands.
1 Create a WRED profile.
CONFIGURATION mode
wred
2 Specify the minimum and maximum threshold values.
WRED mode
Quality of Service (QoS) 777