Administrator Guide

Link Layer Discovery Protocol (LLDP)
Link layer discovery protocol (LLDP) advertises connectivity and management from the local station to the adjacent stations on an IEEE
802 LAN.
This chapter contains the following sections:
LLPD Commands
LLDP-MED Commands
LLDP facilitates multi-vendor interoperability by using standard management tools to discover and make available a physical topology for
network management. The Dell Networking operating system implementation of LLDP is based on IEEE standard 801.1ab.
The starting point for using LLDP is invoking LLDP with the protocol lldp command in either CONFIGURATION or INTERFACE
mode.
The information LLDP distributes is stored by its recipients in a standard management information base (MIB). You can access the
information by a network management system through a management protocol such as simple network management protocol (SNMP).
Topics:
LLPD Commands
snmp-notification-interval
LLDP-MED Commands
LLPD Commands
The following are LLDP commands.
advertise dot1-tlv
Advertise dot1 TLVs (Type, Length, Value).
C9000 Series
Syntax
advertise dot1-tlv {port-protocol-vlan-id | port-vlan-id | vlan-name}
To remove advertised dot1-tlv, use the no advertise dot1-tlv {port-protocol-vlan-id | port-
vlan-id | vlan-name} command.
Parameters
port-protocol-
vlan-id
Enter the keywords port-protocol-vlan-id to advertise the port protocol VLAN
identification TLV.
port-vlan-id Enter the keywords port-vlan-id to advertise the port VLAN identification TLV.
vlan-name Enter the keywords vlan-name to advertise the vlan-name TLV. This keyword is only
supported on the C-Series and S-Series.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
32
Link Layer Discovery Protocol (LLDP) 1005