Administrator Guide

ipv6 mld snooping enable
Enable MLD snooping on the switch globally.
Syntax
ipv6 mld snooping enable
To disable MLD snooping, use the no ipv6 mld snooping enable command.
Defaults Enabled on all VLAN interfaces.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping explicit-tracking
Enable explicit MLD snooping tracking on an interface.
Syntax
ipv6 mld snooping explicit-tracking
To disable MLD snooping explicit tracking, use the no ipv6 mld snooping explicit-tracking
command.
Defaults Disabled.
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping mrouter
Configure a Layer 2 port as a multicast router port.
Syntax
ipv6 mld snooping mrouter interface {interface interface}
Parameters
interface Enter the keyword interfaceto indicate the next-hop interface to the multicast router.
interface Enter one of the following keywords and the interface information:
• For a null interface, enter the keyword null then the slot/port information. The Null
interface number is 0.
• For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information.
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
• For a port channel interface, enter the keywords port-channel then a number.
1048 Multicast Listener Discovery Protocol