Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1241

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Introduced on the C-Series and S-Series.

7.6.1.0 Introduced on the E-Series.

Usage Information Do not enter this command before creating the access-list.

ip pim query-interval

Change the frequency of PIM Router-Query messages.

C9000 Series

Syntax

ip pim query-interval seconds

To return to the default value, use the no ip pim query-interval seconds command.

Parameters

seconds

Enter a number as the number of seconds between router query messages. The range is

from 0 to 65535. The default is 30 seconds.

Defaults 30 seconds

Command Modes

INTERFACE

INTERFACE (BATCH Mode)

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.