Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON and S4048-ON
9.7(0.0) Introduced on the S6000-ON. Added support for VRF on S6000, S4810, S4820T, Z9000,
Z9500, and S6000–ON.
9.7(0.0) Added support for VRF.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information
Dell Networking OS supports standard access lists for the SSM range. You cannot use extended ACLs for
configuring the SSM range. If you configure an extended ACL and then used in the ip pim ssm-range
{access list name} configuration, an error is reported.
However, if you configure ip pim ssm-range {access list name} first and then you configure the ACL
as an Extended ACL, an error is not reported and the ACL is not applied to the SSM range.
Dell Networking OS-recommended best-practices are to configure the standard ACL, and then apply the ACL to
the SSM range. After the SSM range is applied, the changes are applied internally without requiring clearing of the
tree information base (TIB).
When the ACL rules change, the ACL and protocol-independent multicast (PIM) modules apply the new rules
automatically.
When you configure the SSM range, Dell Networking OS supports SSM for configured group range as well as the
default SSM range.
When you remove the SSM ACL, PIM SSM is supported for the default SSM range only.
show ip pim ssm-range
Display the non-default groups added using the SSM range feature.
C9000 Series
Syntax
show ip pim ssm-range
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
PIM-Source Specific Mode (PIM-SSM) 1247