Administrator Guide

write memory local
Use write memory local to save the local configurations to startup configuration.
C9000 Series
Syntax
write memory local
Default None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
Usage Information You can use the write memory local command to write only the local configurations to startup
configuration.
Debugging
Use the commands in this section to debug the port extender hardware.
clear hardware system-flow pe
Clear the system-flow statistics from the specified port extender hardware component.
C9000 Series
Syntax
clear hardware system-flow pe pe-id stack-unit unit number port-set port-pipe-
id counters
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number. Range is from 0 to 7.
port-set port-
pipe-id
Enter the keyword port-set and the port pipe number. Port-pipe-id range is from 0 to
48.
counters Enter the keyword counters to reset the system flow entry counter-values.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
Use the clear hardware system-flow pe command to clear the system flow statistics on a specified port
extender and the stack unit in a PE stack.
Use the keywords port-set along with a port-pipe number, then the keyword counters to clear the system-
flow counters on the selected port-pipe. The port-pipe value is 0.
1312 Port Extenders (PE)