Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#show power detail pe 2 stack‐unit 1
Unit Total System Redundancy Inline Inline Inline Inline Inline
Power Power Power Power Power Power Power Power
Available Consumed Consumed Threshold Available Allocated Consumed
Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts) (Watts)
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
2/1 2000.00 150 150 90 1530.00 308.00 190.00 1222.00
show revision
View the PoE controller firmware version running on the port extender.
C9000 Series
Syntax
show revision {pe pe-id stack-unit unit number}
From a PE console, use show revision to view the revision levels.
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
stack-unit unit-
number
Enter the keyword stack-unit and the unit number. Range is from 0 to 7.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
Example
Dell#show revision pe 0
DEVICE IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target
FPGA 3.7 LP (0)
CPLD 3.0 LP (0)
IAP 3.1 LP (0)
FPGA 3.7 LP (1)
CPLD 3.0 LP (1)
IAP 3.1 LP (1)
FPGA 3.7 LP (2)
CPLD 3.0 LP (2)
IAP 3.1 LP (2)
FPGA 3.7 LP (3)
CPLD 3.0 LP (3)
IAP 3.1 LP (3)
FPGA 3.7 LP (4)
CPLD 3.0 LP (4)
IAP 3.1 LP (4)
FPGA 3.7 LP (5)
CPLD 3.0 LP (5)
1332 Port Extenders (PE)