Administrator Guide
burst-KB
(OPTIONAL) Enter the burst size in KB. The range is from 16 to 200000. The default is
100.
peak
peak-rate
(OPTIONAL) Enter the keyword peak then a number to specify the peak rate in Mbps.
The range is from 0 to 40000. The default is the same as designated for committed-
rate.
Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate. Granularity for committed-
rate and peak-rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-IN
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information The default burst size is 100Kb. If a different value is required, you must configure the burst size to the required
value.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of an output QoS policy.
C9000 Series
Syntax
rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets} [committed {kbps
| pps} committed-rate {burst-kbps | burst-packets}]
Parameters
kbps Enter the keyword kbps to specify the rate limit in kilobits per second (Kbps) in multiples
of 64. The default granularity is Megabits per second (Mbps).The range is from 0 to
40000000.
pps Enter the keyword pps to specify the rate limit in packets per second (pps).The range is
from 1-268000000.
committed Enter the keyword to specify the committed rate.
burst-kbps
[Optional] Enter the peak rate or committed rate size in kilobits per second. The range is
from 0-10000 . The default is 50.
burst-packets
[Optional] Enter the peak rate or committed rate size in packets per second. The range is
from 1-1073000. The default is 200.
Command Modes QOS-POLICY-OUT
1374 Quality of Service (QoS)