Administrator Guide

privilege level (LINE mode)
Change the access level for users on the terminal lines.
C9000 Series
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level command.
Parameters
level level
Enter the keyword level then a number for the access level. The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes.
Defaults level = 15
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Authentication and Password Commands
To manage access to the system, use the following the commands:
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
C9000 Series
Syntax
aaa authentication enable {default | method-list-name} method [... method2]
To return to the default setting, use the no aaa authentication enable {default | method-
list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication methods to use as the default
sequence of methods for the Enable login. The default is default enable.
method-list-name Enter a text string (up to 16 characters long) to name the list of enabled authentication
methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password command defines in
CONFIGURATION mode.
1454 Security