Administrator Guide

show version
Display the current Dell Networking OS version information on the system.
C9000 Series
Syntax
show version [all |[pe pe-id]
From a PE console, use show version to view the software version information.
Parameters
all Enter the keyword all to view all components.
pe pe-id Enter the keyword pe and the port extender (PE) ID to view show version output for a
specific PE. The PE ID range is from 0 to 255.
NOTE: The pe option is only available when the extended bridge feature is
enabled.
.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
The following table lists the information shown in the example.
Lines
Beginning With
Lines Beginning With
Dell Force10
Network...
Name of the operating system
Dell Force10
Operating...
OS version number
Dell Force10
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10
uptime is...
Amount of time the system has been up
System image... Image file name
Control and Monitoring 149