Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1511

vrf instance

(OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF Instance name to open

an SSH connection to that instance.

ipv4 address

(OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D.

ipv6-address

prefix-length

(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length in

the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

-c

encryption

cipher

Enable the “FIPS mode enable", this mode will support only v2 client.

"no fips mode enable"(disable) will support v1 & v2 client. This comment is applicable for

both ciphers & HMAC algorithms:

• 3des-cbc

• aes128-cbc

• aes192-cbc

• aes256-cbc

• aes128-ctr

• aes192-ctr

• aes256-ctr

-l

username

(OPTIONAL) Enter the keyword -l then the user name used in this SSH session. The

default is the user name of the user associated with the terminal.

-m

HMAC

algorithm

Enter one of the following HMAC algorithms to use. (For v2 clients only):

"no fips mode enable"(disable) will support v1 & v2 client.

• hmac-sha1: Force ssh to use hmac-sha1 HMAC algorithm.

• hmac-sha1-96: Force ssh to use hmac-sha1-96 HMAC algorithm.

• hmac-md5: Force ssh to use hmac-md5 HMAC algorithm.

• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm.

• hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm.

-p

port-number

(OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to 65535.

The default is 22.

-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the

version from the protocol negotiation.

Defaults As shown in the Parameters section.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.

9.9(0.0) Introduced on the C9010.

9.5(0.1) Added support for the following ciphers and HMAC alogorithms on the Z9000, S6000,

S4820T, S4820T.