Administrator Guide

To copy the
running
configuration
enter the keyword running-config
To copy the
startup
configuration
enter the keyword startup-config
To copy using a
Secure Copy
(SCP),
enter the keyword scp:
• If you enter scp: in the source position, enter the target
URL;
• If you enter scp: in the target position, first enter the source
URL;
To copy a file on a
TFTP server
enter tftp://hostip/filepath
To copy a file from
an external USB
drive
enter usbflash://filepath
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.11(0.0) Introduced on N20xx and N30xx series.
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.1) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point> parameters to
support remote NFS file system.
9.4(0.0) Added the compressed-config parameter.
9.0.2.0 Introduced on the S6000.
8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series ExaScale.
7.6.1.0 Introduced on the S-Series and added the SSH port number to the SCP prompt sequence
on all systems.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Dell Networking OS supports a maximum of 100 files at the root directory level, on both the internal and external
Flash.
When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and
Dell Networking OS prompts you for the rest of the information. For example, when using SCP, you can enter
copy running-config scp: where running-config is the source and the target is specified in the
ensuing prompts. Dell Networking OS prompts you to enter any required information, as needed for the named
destination — remote destination, destination filename, user ID, password, etc.
164 File Management