Administrator Guide
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2.(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
7.6.1.0 Introduced on the S-Series (S50 only).
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information If the interface is disabled, the cost value is subtracted from the priority value and forces a new MASTER election
if the priority value is lower than the priority value in the BACKUP virtual routers.
IPv6 VRRP Commands
The following are IPv6 VRRP commands.
• clear counters vrrp ipv6
• debug vrrp ipv6
• show vrrp ipv6
• vrrp-ipv6-group
The following commands apply to IPv4 and IPv6:
• advertise-interval
• clear counters vrrp ipv6
• description
• disable
• hold-time
• preempt
• priority
• show config
• virtual-address
clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
C9000 Series
Syntax
clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
vrid
(OPTIONAL) Enter the number of an IPv6 VRRP group. The range is from 1 to 255.
vrf
instance
(OPTIONAL) Enter the name of a VRF instance (32 characters maximum) to clear the
counters of all IPv6 VRRP groups in the specified VRF.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Virtual Router Redundancy Protocol (VRRP) 1705