Administrator Guide

Command History
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Example
Dell#pwd
flash:/default_diag_report_dir
Related
Commands
cd – changes the directory.
rename
Rename a file in the local file system.
C9000 Series
Syntax
rename url url
From a PE console, use rename {flash: directory name/path | usbflash: directory name/
path}
Parameters
directory name/
path
Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// and the filename.
• For a file on an NFS mounted file system, enter nfsmount:// and the mount point
and file path.
• For a file on an external USB drive, enter usbflash:// and the filename.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.1) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point> parameters to
support remote NFS file system.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on S-Series
7.5.1.0 Introduced on C-Series
E-Series Original command
File Management 171