Administrator Guide

username admin password 7 1d28e9f33f99cf5c
!
linecard 0 provision C9000LC2410G
!
interface TenGigabitEthernet 0/0
!
protocol lldp
no shutdown
!
!
!
Example (PE
Console)
Related
Commands
format flash — Erases all the existing files and reformats the file system in the internal flash memory.
show file-systems
Display information about the file systems on the system.
Syntax
show file-systems
From a PE console, use show file-systems to view the file-system information.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Command Fields
Field Description
size(b) Lists the size (in bytes) of the storage location. If the location is remote, no size is listed.
Free(b) Lists the available size (in bytes) of the storage location. If the location is remote, no size
is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word network is listed.
Flags Displays the access available to the storage location. The following letters indicate the
level of access:
• r = read access
• w = write access
Prefixes Displays the name of the storage location.
File Management 177