Administrator Guide
upgrade system-image-os6
This command removes Dell Networking OS 9.x.x.x and installs Dell Networking OS 6.x.x.x on a N-series port extender, so that it can be
used as a switch.
C9010
Syntax
upgrade system-image-os6 {pe {pe-id}} {stack-unit {stack-unit-id} {tftp:// |
Scp:// | ftp:// | usbflash:// | flash://}
Parameters
NOTE: This command is a hidden command and would not show up in the Dell Networking OS help
file. This command needs to be entered manually.
pe
pe-id
Enter the keyword pe and specify the pe-id to sync the OS 6 image to the port extender.
stack-unit
stack-
unit-id
Enter the keyword stack-unit and specify the stack-unit ID which contains the port
extender.
tftp://
Enter the location of the OS6 files on a tftp server.
Scp://
Enter the location of the OS6 files on a scp server.
ftp://
Enter the location of the OS6 files on a ftp server.
usbflash://
Enter the location of the OS6 files on a USB drive.
flash://
Enter the location of the OS6 files on a flash drive.
Default None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.11(0.0) Introduced on the C9010
Usage Information If you previously installed Dell Networking OS 9.x.x.x on a N20xx or N30xx series device to use it as a port
extender for a C9010, you can use the upgrade system-image-os6 command to install Dell Networking OS 6.x.x.x
and use it as a switch.
verify
Validate the software image on the flash drive after the image has been transferred to the system, but before the image has been
installed.
C9000 Series
Syntax
verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5 Enter the md5 keyword to use the MD5 message-digest algorithm.
sha256
Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm
flash:// (Optional). Enter the flash:// keyword. The default is to use the flash drive. You can
just enter the image file name.
img-file
Enter the name the Dell Networking software image file to validate.
hash-value
(Optional). Enter the relevant hash published on i-Support.
188 File Management