Administrator Guide

2-10,99
Group Name :
HostGroup
Egress IP Acl :
Group5
Vlan Members :
1,1000
show cam-acl-vlan
Display the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACL VLAN optimization, VLAN
iSCSI counters, and Open Flow.
C9000 Series
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Usage Information After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the switch to enable ACL VLAN
optimization.
The following table describes the output fields of the show cam-acl-vlan command:
Table 1. show cam-acl-vlan Command Description
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated for ACLs for
various VLAN operations at a system-wide, global
level.
Stack Unit <number> Details about the CAM blocks allocated for ACLs for
various VLAN operations for a particular stack unit.
Current Settings(in block sizes) Information about the number of FP blocks that are
currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open flow operations.
VlanIscsi Number of FP blocks for VLAN internet small
computer system interface (iSCSI) counters.
VlanHp Number of FP blocks for VLAN high performance
processes.
VlanFcoe Number of FP blocks for VLAN Fiber Channel over
Ethernet (FCoE) operations.
VlanAclOpt Number of FP blocks for ACL VLAN optimzation
feature.
Example
Dell#show cam-acl-vlan
-- Chassis Vlan Cam ACL --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
252 Access Control Lists (ACL)