Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

321

322

323

324

325

326

327

328

329

330

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage Information

If you enter the bgp dampening command, the default values for half-life, reuse, suppress, and max-

suppress-time are applied. The parameters are position-dependent; therefore, if you configure one parameter,

configure the parameters in the order they appear in the CLI.

Commands

show ip bgp dampened-paths — views the BGP paths.

bgp default local-preference

Change the default local preference value for routes exchanged between internal BGP peers.

C9000 Series

Syntax

bgp default local-preference value

To return to the default value, use the no bgp default local-preference command.

Parameters

value

Enter a number to assign to routes as the degree of preference for those routes. When

routes are compared, the higher the degree of preference or local preference value, the

more the route is preferred. The range is from 0 to 4294967295. The default is 100.

Defaults 100

Command Modes ROUTER BGP

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.