Administrator Guide

To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address prefix-length
updates [in | out] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
C9000 Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in |
out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length
in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Enter the no debug ip bgp command to remove all configured debug commands for BGP.
442 Border Gateway Protocol