Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

641

642

643

644

645

646

647

648

649

650

RSA Authentication : disabled.

Vty Encryption HMAC Remote IP

0 aes128-ctr hmac-md5 10.16.150.185

With FIPS Mode enabled:

Dell#show ip ssh

SSH server : enabled.

SSH server version : v2.

SSH server vrf : default.

SSH server ciphers : aes256-ctr,aes256-cbc,aes192-ctr,aes192-

cbc,aes128-ctr,aes128-cbc,3des-cbc.

SSH server macs : hmac-sha2-256,hmac-sha1,hmac-sha1-96.

SSH server kex algorithms : diffie-hellman-group14-sha1.

Password Authentication : enabled.

Hostbased Authentication : disabled.

RSA Authentication : disabled.

Vty Encryption HMAC Remote IP

0 aes128-ctr hmac-sha1 10.16.150.185

Dell(conf)#

ssh

Open an SSH connection specifying the hostname, username, port number, and version of the SSH client.

C9000 Series

Syntax

ssh {hostname|ipv4 address|ipv6 address} [-c encryption cipher|-l username|-m

HMAC alogorithm|-p port-number|-v {1|2}]

Parameters

hostname (OPTIONAL) Enter the IP address or the hostname of the remote device.

ipv4 address (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D.

ipv6 addressprefix (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length in

the /x format. The range is from /0 to /128

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

-c encryption

cipher

Enter the following encryption cipher to use. (For v2 clients only.)

Without the FIPS mode enabled:

• aes256-ctr : Force ssh to use the aes256-ctr encryption cipher.

• aes256-cbc : Force ssh to use the aes256-cbc encryption cipher.

• aes192-ctr : Force ssh to use the aes192-ctr encryption cipher.

• aes192-cbc : Force ssh to use the aes192-cbc encryption cipher.

• aes128-ctr : Force ssh to use the aes192-ctr encryption cipher.

• aes128-cbc : Force ssh to use the aes192-cbc encryption cipher.

• 3des-cbc : Force ssh to use 3des-cbc encryption cipher.

With the FIPS mode enabled: