Administrator Guide

clear alarms
Clear alarms on the system.
C9000 Series
Syntax
clear alarms
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information This command clears alarms that are no longer active. If an alarm situation is still active, it is seen in the system
output.
clear average-power
Reset the average power and average power start time.
Syntax
clear average-power stack-unit {stack-unit-number}
Parameters
stack-unit-number Enter the stack unit number.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(2.1P1) Introduced on all Dell EMC Networking OS platforms
Usage Information
This command resets the average power and average power start time to the current time. Average power and
average power start time will be calculated from the reset time (i.e current time).
Example
This output is only applicable for the C1048P, N20xx and N30xx.
DellEMC#clear average-power pe 2 stack-unit 3
Proceed to clear Average power ? Confirm [yes/no]:yes
DellEMC#
Control and Monitoring 67