Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

781

782

783

784

785

786

787

788

789

790

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

7.5.1.0 Added IPv6 ISIS support.

6.3.1.0 Introduced.

Commands

• distribute-list out — suppresses networks from being advertised in updates.

• redistribute — redistributes routes from one routing domain to another routing domain.

distribute-list out

Suppress network prefixes from being advertised in outbound updates.

C9000 Series

Syntax

distribute-list prefix-list-name out [connected | bgp as number | ospf process-

id | rip | static]

To return to the default values, use the no distribute-list prefix-list-name out [bgp as

number connected | ospf process-id | rip | static] command.

Parameters

prefix-list-name

Specify the prefix list to filter prefixes in routing updates.

connected (OPTIONAL) Enter the keyword connected for directly connected routing process.

ospf

process-id

(OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is

from 1 to 65535.

bgp

as number

(OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.

rip (OPTIONAL) Enter the keyword rip for RIP routes.

static (OPTIONAL) Enter the keyword static for user-configured routing process.

Defaults Not configured.

Command Modes

• ROUTER ISIS (for IPv4)

• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)