Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

811

812

813

814

815

816

817

818

819

820

Command Modes

• ROUTER ISIS (for IPv4)

• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

7.8.1.0 Added support for multi-topology ISIS.

6.3.1.0 Introduced.

metric-style

Configure a router to generate and accept old-style, new-style, or both styles of type, length, and values (TLV).

C9000 Series

Syntax

metric-style {narrow [transition] | transition | wide [transition]} [level-1 |

level-2]

To return to the default values, use the no metric-style {narrow [transition] | transition |

wide [transition]} [level-1 | level-2] command.

Parameters

narrow Allows you to generate and accept old-style TLVs. The metric range is from 0 to 63.

transition Allows you to generate both old-style and new-style TLVs. The metric range is from 0 to

63.

wide Allows you to generate and accept only new-style TLVs. The metric range is from 0 to

16777215.

level-1 Enables the metric style on Level 1.

level-2 Enables the metric style on Level 2.

Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured.

Command Modes ROUTER ISIS