Administrator Guide

ah Use the AH protocol when you select the AH transform set in the crypto policy.
esp Use the ESP protocol when you select the ESP transform set in the crypto policy.
spi Enter the security parameter index number.
hex-key-string Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES algorithms,
specify at least 16 bytes per key. For SHA algorithms, specify at least 20 bytes per key.
encrypt Indicates the ESP encryption transform set key string.
auth Indicates the ESP authentication transform set key string.
Defaults none
Command Modes CONF-CRYPTO-POLICY
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage Information
• This command is only available in the ipsec-manual model.
• The key information entry is associated with the global method for enabling clear text or encrypted display in
the running config.
show crypto ipsec transform-set
Display the transform set configuration.
C9000 Series
Syntax
show crypto ipsec transform-set name
Parameters
name Enter the name of the transform set.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show crypto ipsec transform-set
Transform-Set Name : dallas
Transform-Set refCnt : 0
AH Transform :
ESP Auth Transform :
860 Internet Protocol Security (IPSec)