Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

951

952

953

954

955

956

957

958

959

960

Version Description

9.13.0.1P1 Introduced peTenGigE interface support on the C9010.

9.11(0.0) Updated the command output to include the unicast reverse path forwarding (uRPF)

status.

9.9(0.0) Introduced on the C9010.

9.5(0.1) Added support for IPv6 recursive DNS addresses.

9.2(1.0) Introduced on the Z9500.

9.2.(0.0) Added support for tunnel interface.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.4.2.1 Introduced on the S-Series.

8.2.1.0 Introduced on the E-Series ExaScale. Added support for the managementethernet

slot/port parameter.

7.8.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series TeraScale.

Usage Information The Management port is enabled by default (no shutdown). If necessary, use the ipv6 address command

to assign an IPv6 address to the Management port.

Example

Dell# show ipv6 interface linecard 0

TenGigabitEthernet 0/2 is down, line protocol is down

IPV6 is enabled

Link Local address: fe80::7686:7aff:feff:6f08

Global Unicast address(es):

10:10:10:1::8, subnet is 10:10:10::/48 (MANUAL)

Remaining lifetime: infinite

Global Anycast address(es):

Joined Group address(es):

ff02::1

ff02::2

ff02::1:ff00:8

ff02::1:ffff:6f08

ND MTU is 0

ICMP redirects are not sent

DAD is enabled, number of DAD attempts: 3

ND reachable time is 27000 milliseconds

ND base reachable time is 30000 milliseconds

ND advertised reachable time is 0 milliseconds

ND advertised retransmit interval is 0 milliseconds

ND router advertisements are sent every 200 to 600 seconds

ND router advertisements live for 1800 seconds

ND advertised hop limit is 64

IPv6 hop limit for originated packets is 64

IPv6 unicast RPF check is not supported

Dell# show ipv6 interface linecard 0 configured