Administrator Guide

mac learning-limit station-move-violation
Specify the actions for a station move violation.
C9000 Series
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-violation command, then
the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and offending interface and
generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down the offending interface and
generate a syslog message.
shutdown-original Enter the keywords shutdown-original to shut down the original interface and
generate a syslog message.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit reset
Reset the MAC address learning-limit error-disabled state.
C9000 Series
Syntax
mac learning-limit reset
Defaults none
Command Modes
• EXEC
• EXEC Privilege
976 Layer 2