Users Guide

• Display the current status of a port or port-channel interface used in the VLT domain.
EXEC mode
show interfaces interface
• interface: specify one of the following interface types:
• Fast Ethernet: enter fastethernet slot/port.
• 1-Gigabit Ethernet: enter gigabitethernet slot/port.
• 10-Gigabit Ethernet: enter tengigabitethernet slot/port.
• Port channel: enter port-channel {1-128}.
Examples of the show vlt and show spanning-tree rstp Commands
The following example shows the show vlt backup-link command.
Dell_VLTpeer1# show vlt backup-link
VLT Backup Link
-----------------
Destination: 10.11.200.18
Peer HeartBeat status: Up
HeartBeat Timer Interval: 1
HeartBeat Timeout: 3
UDP Port: 34998
HeartBeat Messages Sent: 1026
HeartBeat Messages Received: 1025
Dell_VLTpeer2# show vlt backup-link
VLT Backup Link
-----------------
Destination: 10.11.200.20
Peer HeartBeat status: Up
HeartBeat Timer Interval: 1
HeartBeat Timeout: 3
UDP Port: 34998
HeartBeat Messages Sent: 1030
HeartBeat Messages Received: 1014
The following example shows the show vlt brief command.
Dell_VLTpeer1# show vlt brief
VLT Domain Brief
------------------
Domain ID: 1000
Role: Secondary
Role Priority: 32768
ICL Link Status: Up
HeartBeat Status: Up
VLT Peer Status: Up
Local Unit Id: 0
Version: 5(1)
Local System MAC address: 00:01:e8:8a:e9:70
Remote System MAC address: 00:01:e8:8a:e7:e7
Configured System MAC address: 00:0a:0a:01:01:0a
Remote system version: 5(1)
Delay-Restore timer: 90 seconds
Dell_VLTpeer2# show vlt brief
VLT Domain Brief
------------------
Domain ID: 1000
Virtual Link Trunking (VLT) 1197