Users Guide

-----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Protocol State: In-Sync
Peer DCBx Status:
----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Total DCBx Frames transmitted 994
Total DCBx Frames received 646
Total DCBx Frame errors 0
Total DCBx Frames unrecognized 0
The following table describes the show interface DCBx detail command fields.
Table 22. show interface DCBx detail Command Description
Field Description
Interface Interface type with chassis slot and port number.
Port-Role Configured DCBx port role: auto-upstream, auto-
downstream, config-source, or manual.
DCBx Operational Status Operational status (enabled or disabled) used to elect
a configuration source and internally propagate a
DCB configuration. The DCBx operational status is
the combination of PFC and ETS operational status.
Configuration Source Specifies whether the port serves as the DCBx
configuration source on the switch: true (yes) or false
(no).
Local DCBx Compatibility mode DCBx version accepted in a DCB configuration as
compatible. In auto-upstream mode, a port can only
received a DCBx version supported on the remote
peer.
Local DCBx Configured mode DCBx version configured on the port: CEE, CIN, IEEE
v2.5, or Auto (port auto-configures to use the DCBx
version received from a peer).
Peer Operating version DCBx version that the peer uses to exchange DCB
parameters.
Local DCBx TLVs Transmitted Transmission status (enabled or disabled) of
advertised DCB TLVs (see TLV code at the top of the
show command output).
Local DCBx Status: DCBx Operational Version DCBx version advertised in Control TLVs.
Local DCBx Status: DCBx Max Version Supported Highest DCBx version supported in Control TLVs.
Local DCBx Status: Sequence Number Sequence number transmitted in Control TLVs.
Data Center Bridging (DCB) 331