Users Guide

shutdown
Dell#
Clearing IPv6 Routes
To clear routes from the IPv6 routing table, use the following command.
• Clear (refresh) all or a specific route from the IPv6 routing table.
EXEC mode
clear ipv6 route {* | ipv6 address prefix-length}
• *: all routes.
• ipv6 address: the format is x:x:x:x::x.
• mask: the prefix length is from 0 to 128.
NOTE: IPv6 addresses are normally written as eight groups of four hexadecimal digits, where each
group is separated by a colon (:). Omitting zeros is accepted as described in Addressing.
IPv6 Routing 581