Users Guide

Once the cascade interfaces are configured, the PE starts functioning in a dual homing setup as shown

in the following diagram:

Figure 109. Standalone System and System with PE — After setting up Dual Homing

You can configure PE 1 from both System A and System B.

Upgrading to OS 9.10(0.0)

To upgrade the Dell Networking OS 9.9(0.0) to OS 9.10(0.0):

• Upgrade the bootflash of the devices to 3.3.1.18 in OS 9.10.0.0.

• Upgrade the system-image in the Controlling Bridge (CB). Select the flash partition path to boot from,

then Save and Reload.

The following example shows a CB and a PE running OS 9.9(0.0):

Dell#show version

Dell Real Time Operating System Software

Dell Operating System Version: 2.0

Dell Application Software Version: 9.9(0.0)

Build Time: Tue Sep 8 03:51:15 2015

Build Path: /sites/eqx/work/swbuild01_1/patch02/E9-9-0/SW/SRC

Dell Networking OS uptime is 10 minute(s)

System image file is "system://A"

System Type: C9010

Control Processor: Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory,

core(s) 4.

Route Processor: Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory,

core(s) 4.

Port Extenders (PEs) 838