Users Guide
0 Management online C1048P C1048P 1-0(0-4149) 52
1 Member not present
2 Member not present
3 Standby online C1048P C1048P 1-0(0-4149) 52
4 Member not present
5 Member not present
6 Member not present
7 Member not present
Verifying a PE Stack Master and Standby
The Status LED on the front panel of a PE stack unit identifies the unit’s role in the stack.
• Off indicates that the unit is a stack member.
• Off also indicates that the unit is stack standby.
• Solid green indicates that the unit is the stack master (management unit).
Displaying PE Stack Information
To display information about a PE stack configuration, enter the following show commands in EXEC Privilege
mode.
• Display information about PE stack units connected to the C9010, including the discovery status.
show pe
Dell# show pe
Maximum number of PE Units allowed: 40
Current number of PE units in the system: 8
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 0
Status: online
System Mac: a0:68:00:3f:92:bc
PE Up Time: 14:13:03
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/0(A),Te 2/22(A)
Cascade LAG: Po 258(Up)
-------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
-------------------------------------------------------------------
0 online - C1048P a0:68:00:3f:92:bc 52
1 online - C1048P 6c:c0:00:11:22:33 52
2 online - C1048P 34:17:eb:00:bb:09 52
3 online - C1048P 62:74:00:41:54:c8 52
4 online - C1048P 62:74:00:41:54:c9 52
5 online - C1048P cb:28:00:42:bd:7c 52
6 online - C1048P 62:74:00:41:54:01 52
7 online - C1048P 6c:c0:00:43:11:11 52
• Display summary information about the PE stack units attached to the master PE. Enter the PE ID of the
master unit.
Port Extender (PE) Stacking 853