Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1011

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.12.0 Introduced on the S4810.

Usage

Information

If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC

addresses are converted to sticky for that port. Any new MAC address that is learned also becomes

sticky for that port.

Commands

show mac learning-limit — displays the details of the mac learning-limit.

mac learning-limit station-move-violation

Specify the actions for a station move violation.

C9000 Series

Syntax

mac learning-limit station-move-violation {log | shutdown-both | shutdown-

offending | shutdown-original}

To disable a configuration, use the no mac learning-limit station-move-violation

command, then the configured keyword.

Parameters

log Enter the keyword log to generate a syslog message on a station move violation.

shutdown-both Enter the keyword shutdown to shut down both the original and offending

interface and generate a syslog message.

shutdown-

offending

Enter the keywords shutdown-offending to shut down the offending interface

and generate a syslog message.

shutdown-

original

Enter the keywords shutdown-original to shut down the original interface and

generate a syslog message.

Defaults none

Command Modes INTERFACE (conf-if-interface-slot/port)