Administrator Guide

Example 2: service timestamps log datetime utc
DellEMC#show clock
15:47:05.661 IST Fri May 17 2019
DellEMC(conf)#service timestamps log datetime utc
Example 3: service timestamps log uptime
DellEMC#show clock
15:51:47.534 IST Fri May 17 2019
DellEMC(conf)#service timestamps log uptime
Example 4: no service timestamps log
DellEMC#show clock
15:55:12.246 IST Fri May 17 2019
DellEMC(conf)#no service timestamps log
DellEMC# show command-history
[May 17 15:53:44]: CMD-(CLI):[show logging]by default from console
[May 17 15:53:53]: CMD-(CLI):[show command-history]by default from
console
[May 17 15:54:54]: CMD-(CLI):[end]by default from console
[May 17 15:55:00]: CMD-(CLI):[show logging]by default from console
[May 17 15:55:12]: CMD-(CLI):[show clock]by default from console
[May 17 15:55:22]: CMD-(CLI):[show running-config]by default from console
[May 17 15:55:27]: CMD-(CLI):[show command-history]by default from
console
show console lp
View the buffered boot-up log of a line card, Route Processor or Control Processor CPU, including background resets, calls, and
initialization, on the console.
C9000 Series
Syntax
show console {lp slot-id | rp | cp}
Parameters
lp slot-id Enter a line-card slot number to view the boot-up log of a line-card (LP) processor.
The range of the slot IDs is from 0 to 2.
rp Enter the rp keyword to view the boot-up log for the Route Processor CPU.
cp Enter the cp keyword to view the boot-up log for the Control Processor CPU.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
102 Control and Monitoring