Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell# show cam mac linecard 1 port-set 0
PVlanId Mac Address Region Interface
1 00:01:02:03:04:09 DYNAMIC Fo 2/0
0 74:86:7a:ff:6f:1c LOCAL_DA 00001
1 00:11:22:33:44:55 STATIC Fo 2/8
1 00:01:02:03:04:07 DYNAMIC Fo 2/0
1 00:01:02:03:04:08 DYNAMIC Fo 2/0
0 ff:ff:ff:ff:ff:ff STATIC 00001
1 00:01:02:03:04:05 DYNAMIC Fo 2/0
1 00:01:02:03:04:06 DYNAMIC Fo 2/0
show mac-address-table
Display the MAC address table.
C9000 Series
Syntax
show mac-address-table [address mac-address | interface interface | vlan
vlan-id] [aging-time] [dynamic | static] [count [vlan vlan-id] [interface
interface-type [slot [/port]]]]
Parameters
address mac-
address
(OPTIONAL) Enter the keyword address then a MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses
the switch dynamically learns. Optionally, you can also add one of these
combinations: address/mac-address, interface/interface, or vlan
vlan-id.
static (OPTIONAL) Enter the keyword static to display only those MAC addresses
specifically configured on the switch. Optionally, you can also add one of these
combinations: address/mac-address, interface/interface, or vlan
vlan-id.
aging-time Enter the keyword aging-time to display only aging-time information.
interface
interface
(OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
1020 Layer 2