Administrator Guide

Column
Heading
Description
Interface Displays the interface type and slot/port information. The following abbreviations
describe the interface types:
● po — Port Channel then a number. The range is from 1 to 255 for TeraScale.
● te — 10-Gigabit Ethernet then a slot/port.
● fo — 40-Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Example
Dell(conf)#do show mac-address-table
Codes: *N - VLT Peer Synced MAC
VlanId Mac Address Type Interface State
2 00:00:00:00:00:01 Dynamic (N) Po 128 Active
2 00:00:00:00:00:02 Dynamic (N) Po 10 Active
2 00:00:00:00:00:03 Dynamic Po 100 Active
2 00:00:00:00:00:04 Dynamic Po 10 Active
Usage
Information
The following describes the show mac-address-table command shown in the following example.
Column
Heading
Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static), learned
(Dynamic), or associated with a specific port (Sticky). An (N) indicates that the
specified MAC address has been learnt by a neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The following abbreviations
describe the interface types:
● po — Port Channel followed by a number. Range for Terascale is from 1 to 255.
\
● te — 10–Gigabit Ethernet followed by a slot/port.
● fo — 40-Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
The following describes the show mac-address-table count command shown in the following
example.
Line
Beginning
With
Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
Dynamic
Address...
Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses the switch uses.
Example (Count)
Dell# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
1022 Layer 2