Administrator Guide

default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured as a member of
another VLAN.
C9000 Series
Defaults Enabled
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced
Usage
Information
The no default vlan disable command is not listed in the running-configuration, but when the
default VLAN is disabled, default-vlan disable is listed in the running-configuration. Use this
command in Configuration Terminal Batch mode to disable the default VLAN in a dual-homing setup.
name
Assign a name to the VLAN.
C9000 Series
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
1026 Layer 2