Administrator Guide

show vlan
Display the current VLAN configurations on the switch.
C9000 Series
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following information:
● VLAN ID
● VLAN name (left blank if none is configured)
● Spanning Tree Group ID
● MAC address aging time
● IP address
id vlan-id (OPTIONAL) Enter the keyword id and VLAN ID number from 1 to 4094 to display
the configuration of the specified VLAN.
name vlan-name (OPTIONAL) Enter the keyword name and the name assigned to a VLAN. Only
information on the specified VLAN is displayed.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Updated to support OpenFlow.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Augmented to display PVLAN data for the C-Series and S-Series and revised the
output to include the Description field to display a user-entered VLAN description.
7.6.1.0 Introduced on the S-Series and revised the output to display Native VLAN.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show vlan command shown in the following example.
Column
Heading
Description
(Column 1 — no
heading)
● asterisk symbol (*) = Default VLAN
● G = GVRP VLAN
● P = primary VLAN
● C = community VLAN
● I = isolated VLAN
● O = OpenFlow
NUM Displays existing VLAN IDs.
1028 Layer 2