Administrator Guide

advertise interface-port-desc
Advertise port descriptor.
Syntax
advertise interface-port-desc {description | port-id}
To remove the advertised port descriptor, use the no advertise interface—port—desc
{description | port-id} command.
Parameters
description Enter the keyword description then the interface description.
port-id Enter the keyword port-id then the port-id. The range is from 0 to 7.
Defaults None
Command Modes
CONFIGURATION (conf-lldp)
INTERFACE (conf-if-interface-lldp)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(2.0P2) Introduced the description and port-id options.
Usage
Information
If you do not specify the option, by default the port-id takes higher precedence and sends the port-id in
the LLDP packets.
advertise dot3-tlv
Configure the system or an interface to advertise IEEE 802.3at extended power-via-mdi.
C9000 Series
Syntax
advertise dot3-tlv power-via-mdi
To remove the advertised dot3–tlv, use the no advertise dot3–tlv power-via-mdi command
Parameters
power-via-mdi Enter the keyword power—via-mdi to advertise IEEE 802.3at power-via-mdi
TLV.
Defaults Disabled
Command Modes
● LLDP CONFIGURATION (conf-lldp)
● INTERFACE LLDP CONFIGURATION (conf-if-interface-lldp)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The advertise dot3–tlv power—via—mdi command enables the system to advertise IEEE 802.3at
power-via-mdi TLV to advertise its power negotiation capabilities with the powered devices via Link Layer
Discovery Protocol (LLDP). You can configure this command either on a specific interface or globally.
Example
Dell(conf)#interface peGigE 0/0/0
Dell(conf-if-pegi-0/0/0)#protocol lldp
Link Layer Discovery Protocol (LLDP) 1051