Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 The output of the show environment fan command for the S Series is changed to
display fan speeds instead of showing the fan status as up or down.
Usage
Information
The following example shows the output of the show environment command.
Example (all)
This output is applicable for the C9000 platform.
DellEMC#show env
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed
------------------------------------
1 1 up up 10780
1 2 up up 10780
1 3 up up 10780
1 4 up up 10780
1 5 up up 10780
Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed Power AvgPower AvgPowerStartTime
----------------------------------------------------------------------------
0 0 up
AC up 3104 174 175 05/26/2017-03:33
0 1 absent
0 2 up
AC up 3104 174 175 05/26/2017-03:33
0 3 absent
Total power: 348.0 W
-- Unit Environment Status --
Unit Status Temp Voltage
----------------------------------
* 1 online 28C ok
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Sensor-CPU Sensor-MAC Sensor-Left Sensor-Right Sensor-QSFP Sensor-DCFAN Sensor-BCM
----------------------------------------------------------------------------------------------
1 25 28 25 22 26 23 36
Example (System
Power Log)
This output is applicable for the C1048P, N20xx, and N30xx series port-extenders.
DellEMC# show env
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
108 Control and Monitoring