Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
101102103104105106107108109110
-------------------------------------------------------
1 1 up up 9056 up 9056
1 2 up up 9037 up 9037
Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
--------------------------------------------------------
1 1 up AC up NA
1 2 up AC up NA
Unit TotalPower AvgPower AvgPowerStartTime
------------------------------------------------
1 30 26 05/25/2017-19:18
show inventory
Display the switch type, components (including media), and Dell Networking OS version, including hardware identification
numbers and configured protocols.
C9000 Series
Syntax
show inventory [media [slot-id | pe pe-id [stack-unit unit-number]]| pe pe-
id]]
From a PE console, use show inventory [media] to view the PE inventory information.
Parameters
media
slot-id
(OPTIONAL) Enter the keyword media to display pluggable media inventory for a
specified line-card slot. Valid slot IDs are from 0 to 2.
pe
pe-id
(OPTIONAL) Enter the keyword pe to display port extender (PE) inventory for a
specified PE ID. Range is from 0 to 255.
NOTE: The pe option is only available when the extended bridge feature is
enabled.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4 optics.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced this version of the command for S-Series. S-Series output differs from
E-Series.
Usage
Information
Use the show inventory command to display information about installed pluggable media (QSFP, SFP)
on a line card. If no optics are installed in the fiber ports, the output displays Media not present or
accessible.
Control and Monitoring 109