Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1091

Version Description

8.3.7.1 Introduced on the S4810.

6.2.1.1 Introduced

clear ip msdp sa-cache

Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active

entries.

C9000 Series

Syntax

clear ip msdp sa-cache [group-address | rejected-sa | local]

Parameters

group-address

Enter the group IP address in dotted decimal format (A.B.C.D.).

rejected-sa Enter the keywords rejected-sa to clear the cache source-active entries that

are rejected because the RPF check failed, an SA filter or limit is configured, the

RP or MSDP peer is unreachable, or because of a format error.

local Enter the keyword local to clear out local PIM advertised entries. It applies the

redistribute filter (if present) while adding the local PIM SA entries to the SA

cache.

Defaults Without any options, this command clears the entire source-active cache.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.1 Introduced on the S4810.

7.8.1.0 Added the local option.

7.7.1.0 Added the rejected-sa option.